UltraSeries QuickFly Rigging, Flying and Mounting Systems

MYA-UPQ Mounting Yoke, UPQ

The MYA-UPQ cradle-style mounting yoke suspends a single UPQ loudspeaker and allows a wide range of horizontal and vertical adjustment. A “C” or “G” clamp and a steel safety cable are required (not supplied).

MPA-UPQ Pick-up and Array Plate, UPQ

MPA-UPQ Pick-up and Array Plate provides a solid connection between UPQ loudspeakers to form horizontal and vertical arrays of up to three loudspeakers, or allows hanging a single or two UPQs arrayed from a single pick-up point. The front adjustment slot is used to adjust the distance between the loudspeakers to achieve the desired splay angle and coverage. Eyebolts can be attached to the UPQ's end plate or to the MPA-UPQ to provide pick-up points. Shackles can also be attached to the MPA-UPQ rear pick-up holes for additional support or to provide control over the array's vertical coverage.

MPA-UPQ can also be used when hanging the cabinet horizontally.

MYA-UPA Mounting Yoke Assembly, UPA-1P/2P

The cradle-style MYA-UPA mounting yoke assembly is available for a single UPA-1P compact wide coverage or UPA-2P compact narrow coverage loudspeaker. The cabinet must be fitted with two M10 nut plates (included) on its base. A hanging clamp (“C” or “G” type) and a steel safety cable are required (not supplied as a part of the yoke assembly kit).

MRF-UPA30 Rigging Frame, UPA-2P

The steel MRF-UPA30 rigging frame is used for arraying UPA-2P compact narrow coverage loudspeakers at fixed 30° splay angles. The MRFPB-UPA rigging frame pick-up bar is required for hanging and tilting. Also, UPA-2P's must be equipped with ring and stud (not supplied as a part of the frame kit).

MRFPB-UPA Rigging Frame Pick-up Bar, UPA-2P

The MRFPB-UPA rigging frame pick-up bar is placed on the ends of and/or between two MRF-UPA30 rigging frames to provide multiple points for tilting a UPA-2P compact narrow coverage loudspeaker array.

MSMP-UPA Stand Mount Plate, UPA-1P/2P

The custom MSMP-UPA stand mount plate is available for the UPA-1P compact wide coverage and UPA-2P compact narrow coverage loudspeakers. It accepts an Atlas or Ultimate Support BMB-200K “top hat” adapter (not included).

MYA-UPJ Mounting Yoke, UPJ-1P

The MYA-UPJ cradle-style mounting yoke suspends a single UPJ-1P loudspeaker and allows a wide range of horizontal and vertical adjustment. A “C” or “G” clamp and a steel safety cable are required (not supplied).

MLB-UPJ L-brackets, UPJ-1P

A pair of MLB-UPJ L-brackets allows the UPJ-1P loudspeaker to be mounted to a wall, ceiling, floor or stage lip. The MLB-UPJ L-brackets can be oriented toward or away from the loudspeaker, providing maximum flexibility for positioning and securing the L-bracket according to the needs of the design and/or the venue.

MAA-UPJ Array Adapter, UPJ-1P

The MAA-UPJ array adapters provide a solid connection between multiple loudspeakers to form a horizontal or vertical array. The front adjustment slot is used to increase or decrease the distance between the front of the loudspeakers and achieve the desired angle between UPJ-1P loudspeakers. Eyebolts can be attached to the UPJ's MEP-UPJ end plate or to the MAA-UPJ to provide pick-up points. In addition, the MAA-UPJ's rear pick-up holes can be used for additional support or for pull back to better control the vertical coverage of the array.

MYA-UPJunior Mounting Yoke, UPJunior

The MYA-UPJunior cradle-style mounting yoke suspends a single UPJunior loudspeaker and allows a wide range of horizontal and vertical adjustment. A “C” or “G” hanging clamp and steel safety cable (not included) are required to suspend the MYA-UPJunior mounting yoke.

MUB-UPJunior U-bracket, UPJunior

The MUB-UPJunior U-bracket allows the UPJunior loudspeaker to be horizontally mounted to a wall, ceiling, floor, or stage lip. The U-Bracket's adjustment slot is used to adjust how close the UPJunior is located to the mounting surface and at what angle the loudspeaker will be positioned.

The MUB-UPJunior U-bracket also enables the UPJunior to be vertically wall-mounted.

The MUB-UPJunior U-bracket can also be used to pole-mount a single UPJunior horizontally with a third-party pole adapter. This combination allows the UPJunior's angle to be adjusted. With the addition of MAAM-UPJunior array adapters, a horizontal array of two UPJuniors can be pole-mounted.

MAAM-UPJunior Array Adapter, UPJunior

The MAAM-UPJunior array adapters provide a solid connection between UPJunior loudspeakers to form horizontal and vertical arrays of up to three loudspeakers. The front adjustment slot is used to adjust the distance between the loudspeakers to achieve the desired splay angle and coverage. Eyebolts can be attached to the UPJunior's end plate or to the MAAM-UPJunior to provide pick-up points. Shackles can also be attached to the MAAM-UPJunior's rear pick-up holes for additional support or to provide control over the array’s vertical coverage.

The MAAM-UPJunior array adapters can also be used for horizontally placing a single UPJunior loudspeaker on a stage for monitoring, with the front adjust slot determining the angle of the loudspeaker.

MPS-UMS Pole Stand

The MPS-UMS pole stand fits into the integral pole mount receptacle in the UMS-1P ultracompact subwoofer to mount a single UPJunior onto a UMS-1P. (A third-party adapter is also required.)

MYA-UPM Mounting Yoke Assembly, UPM-1P/2P

The cradle-style MYA-UPM mounting yoke assembly suspends a single UPM-1P ultra-compact wide coverage or UPM-2P ultra compact narrow coverage loudspeaker and allows almost infinite adjustment of horizontal and vertical orientation. Two M10 nut plates and 3/8" screws are included in the assembly kit. A hanging clamp (“C” or “G” type) and a steel safety cable are required (not supplied as a part of the yoke assembly kit).

MUB-UPM “U” Bracket, UPM-1P/2P

The MUB-UPM U-bracket is ideal for a wide variety of mounting applications, for example, on a stage lip, a ceiling or a wall or other vertical structure. The U-bracket is versatile and meets the common mounting needs of the UPM-1P ultra-compact wide coverage or UPM-2P ultra compact narrow coverage loudspeaker. Includes necessary hardware.

MPK-UMS Pole Mount Kit, UPM-1P/2P/UMS-1P

The MPK-UMS pole mount kit includes a 43" (1090 mm), 1 3/8" (35 mm) diameter pole assembly and an MSA-UPM stand adapter. The stand adapter attaches to a UPM-1P ultra-compact wide coverage or UPM-2P ultra compact narrow coverage loudspeaker fitted with an M10 or 3/8" nut plate. The pole slots into the mounting receptacle fitted as standard to the UMS-1P ultra-compact subwoofer.

MSA-UPM Stand Adapter, UPM-1P/2P/UMS-1P

The MSA-UPM stand adapter allows a 3/8-16" or M10 equipped UPM-1P ultra-compact wide coverage or UPM-2P ultra compact narrow coverage loudspeaker to be mounted onto a 1 3/8" (35 mm) diameter pole (not provided).