Your search for "MICA" returned the following: |
|
|
 |
MTF MILO / MICA
Transition Frame
|
Compatibility
Part #: 40.147.043.01 |
| The MTF-MILO/MICA transition grid allows MICA to be flown below MILO for downfill applications. The compact frame creates minimal space between MILO and MICA cabinets, for both aesthetic and acoustic benefits. Up to 8 MICA may be flown from this frame at a 7:1 safety factor, or 12 MICA cabinets at a 5:1 safety factor. |
 |
MG-MICA
Multipurpose Grid
|
Compatibility
Part #: 40.147.034.01 |
| The MG-MICA multipurpose grid accommodates flown or ground stack configurations for MICA compact high-power curvilinear array loudspeakers and 600-HP compact high-power subwoofers (with optional MRK-600 rigging kit). The MG-MICA allows multiple rigging points. In addition with the use of the MGCP-MICA a single rigging point can be achieved. Up to 22 MICA loudspeakers (or the equivalent weight of any combination of MICA and 600-HP cabinets) can be flown from the MG-MICA grid at a 7:1 safety factor, or 25 MICA loudspeakers at a 5:1 safety factor. Certain restrictions apply, and this rating depends on grid angle and the array’s center of gravity, which can be determined using MAPP Online Pro’s rigging calculator. |
|
MG-MICA w/ MGCP
Multipurpose Grid
|
Compatibility
Part #: 40.147.034.02 |
| MG-MICA Multipurpose Grid with Center Point Rigging Beam installed. |
|
MGCP-MICA
Center Pickup Bar
|
Compatibility
Part #: 40.147.050.01 |
| The MGCP-MICA attaches directly to the MG-MICA grid, and allows for a single point suspension without the need of bridles, especially important in applications with low trim heights. The MGCP-MICA is rated to fly up to 8 MICA loudspeakers (or the equivalent weight of any combination of MICA and 600-HP cabinets) at a 7:1 safety factor, or 11 MICA cabinets at a 5:1 safety factor. Important: Use MAPP Online Pro to determine center of gravity location which will dictate which of the 12 holes on the MGCP to use to achieve desired grid angle. |
 |
MDTL-MICA
Rear Extension Link
|
Compatibility
Part #: 40.147.060.01 |
| The MDTL-MICA downtilt link adds a fixed amount of downtilt to ground-stacked MICA loudspeakers, with an additional 10 degrees of adjustment possible with the MICA’s rear GuideALinks. The downtilt link connects between the MG-MICA grid or the top 600-HP subwoofer and the lowest MICA loudspeaker. |
|
MTF-MICA/600 /M’elodie
Transition Frame
|
Compatibility
Part #: 40.152.080.01 |
| MTF-MICA/600/M’elodie Transition Frame is used to transition from MICA or 600-HP (fitted with MRF-600 frames) to M'elodie. (1 frame included) |
 |
|
Compatibility
Part #: 40.147.033.01 |
| The MCF-MICA caster frame allows up to four MICA cabinets or three 600-HP cabinets (with optional MRK-600 rigging kit) to be transported fully rigged, and is dimensioned to provide tight packing in both U.S. and European truck widths. To make MICA entirely road-ready, durable nylon covers for up to four cabinets are also available. |
Replacement Parts
 |
MRF-MICA Left
Rigging Frame
|
Compatibility
Part #: 40.147.021.01 |
| MICA Left Side Rigging Frame Replacement Kit - Includes front and rear GuideALinks. Important: This is a replacement part. It is included when ordering MICA. |
 |
MRF-MICA Right
Rigging Frame
|
Compatibility
Part #: 40.147.021.02 |
| MICA Right Side Rigging Frame Replacement Kit - Includes front and rear GuideALinks. Important: This is a replacement part. It is included when ordering MICA. |
|
PIN-QRP
Connecting Hardware
|
Compatibility
- MILO
- MILO 60
- MILO 120
- MICA
- 700-HP
- 600-HP
Part #: 134.021 |
| 3/8" X 1.125" QRP Blue button-head. Used in all MILO, MICA, 700-HP and 600-HP rigging holes. (Except in MILO front-bottom positions where 132.022 QRP is used) |
|
