Your search for "700-HP" returned the following:


Replacement Parts

MTG-700

Top Grid

Compatibility

  • 700-HP

Part #: 40.137.072.01

The MTG-700 top grid allows 700-HP subwoofers fitted with the MRK-700 rigging kit to be flown in an array. The MTG-700 can accommodate a variety of different pickup configurations using its six pick-up points. Up to 10 700-HPs may be suspended from the MTG-700 using the corner pick-up points on the grid on a single or multiple rigging points of appropriate rating with a safety factor of 7:1.

Important: MTG-700 Links are required to connect MTG-700 Grid to 700-HP (MTG-700 links are included with the MTG-700 Grid kit). MAL-700 Links are required to attach 700-HP to 700-HP.

MRK-700

Rigging Kit

Compatibility

  • 700-HP

Part #: 40.137.006.01

The 700-HP is designed to be rigged using the professional components included in the MRK-700 rigging kit. This optional rigging kit is available installed at the factory or as a field upgrade. The MRK-700 utilizes rugged rigging bars (shown), AlignaLinks and quick release pins to connect adjacent subwoofers in ground-stack or flown array configurations, as well as to the MTG-700 top grid.

MCF-700

Caster Frame

Compatibility

  • 700-HP

Part #: 40.137.002.01

The heavy-duty MCF-700 caster frame is highly durable and easy to attach to a 700-HP ultrahigh-power subwoofer. When you’re deploying and striking a 700-HP array, the MCF-700 frame can support the weight of the array, making it easy to assemble or disassemble. The MCF-700 also supports up to three 700-HP subwoofers in a ground-stack configuration. The MCF-700’s rugged steel frame allows the use of a forklift. A range of protective transport covers is available.

Replacement Parts

MRB-700

Rigging Bar

Compatibility

  • 700-HP

Part #: 45.137.006.01

700-HP Rigging Bar - To be used only with the 700-HP Subwoofer. This component is permanently attached to the 700-HP. The MRB-700 is the hardware that mounts to the side of a 700HP that allows it to be attached to other 700-HP with links and then flown.

Important: Can be retrofitted to 700-HP Loudspeakers. MAL-700 Links required to attach 700-HP to 700-HP. MTG-700 Links required to connect MTG-700 Grid to 700-HP.

MAL-700

straight rigging link

Compatibility

  • 700-HP

Part #: 61.137.015.01

Part of MRK-700 Rigging kit

Important: Use only MAL-700 straight rigging links when connecting two 700- HP subwoofers. Never use MTG-700 rigging links to connect 700-HP subwoofers.

PIN-QRP

Connecting Hardware

Compatibility

  • MILO
  • MILO 60
  • MILO 120
  • MICA
  • 700-HP
  • 600-HP

Part #: 134.021

3/8" X 1.125" QRP Blue button-head. Used in all MILO, MICA, 700-HP and 600-HP rigging holes. (Except in MILO front-bottom positions where 132.022 QRP is used)