QUICKFLY: THE FASTEST, EASIEST RIGGING SYSTEM IN CAPTIVITY
Fitted as standard, MILO’s QuickFly rigging employs
rugged, reliable and deceptively simple components that remain
captive both in use and in transit. Custom front and rear AlignaLinks
at the cabinet corners couple the units for either flying or
stacking, and allow from 0° to 5° of cabinet splay
adjustable in nine positions (in .5° increments from 0° to
3°, and in 1° increments from 3° to 5°). Because
rigging connections are rigid, the array tilt is easy to adjust — often
eliminating the need for a pull-back strap in flown configurations.
If circumstances dictate an acute array curve, then a PBF-MILO
pull-back frame can be attached to the lowest cabinet (MTB-2D/M
transition bars required).
|
AlignaLink Connectors
MILO utilizes unique, self-seating AlignaLinks for
coupling and angling between adjacent cabinets. The
front AlignaLinks provide a secure pivoting connection.
The rear AlignaLinks allow swift setting of vertical
array angles from 0° to 5° in nine positions.
Both types of connections use custom tapered quick
release pins for speedy setup and tear down. All load
stresses are transmitted through the rigging frames
and associated hardware — not through the wooden
cabinets.
|
|
|
The versatile MG-3D/M multipurpose grid accommodates
a variety of hanging configurations (multipoint support,
bridles, etc.) allowing flown MILO arrays to be easily
created. Up to 24 MILO loudspeakers (or the equivalent
weight of MILOs, M3Ds, M3D-Subs, MG-2D and M2Ds)
can be included in a single array.
|
MILO READY TO GO
MILO is truck-smart. Exterior cabinet dimensions are
ideal for both European and US truck widths. Optional
custom Caster Frames allow smooth transport of stacks
of up to four MILO cabinets and facilitate the use
of forklifts. A range of rugged protective transport
covers is also available.
next...
|
|
| Ground stacked arrays of up to six MILOs (or the
equivalent height of MILOs and M3D-Subs) can be built
with minimal labor and maximum safety utilizing an inverted
MG-3D/M Multipurpose Grid. |
 |
| MILO attaches quickly and easily either
above or below M3D and M3D-Sub as required. MTR-3D/M
Transition Rails form a stable link between adjacent
cabinets. |
 |
M2Ds make ideal down- and near-fill loudspeakers
under MILO arrays. The MTB-2D/M Transition Bars connect
to the MG-2D Multipurpose Grid to
make this arrangement simple and secure. |
 |
|
