| |
 |
| |
Newly designed QuickFly
rigging features captive GuideALinks for easier and safer setup |
QuickFly Rigging
Meyer Sound’s QuickFly rigging is the subject of multiple
patents and broke new ground in providing rigid rigging that allowed
arrays to travel fully rigged and virtually eliminated the need
for pullback cables.
In addition to its all-new loudspeaker components and power amplifier,
MICA also features a brand new design for its QuickFly rigging.
The new rigging features captive GuideALinks that make rigging arrays
both simpler and safer. With MICA’s QuickFly rigging, it is
never necessary to put hands between cabinets while pinning links.
The front links also feature an integral vertical extension setting,
allowing a wide splay angle to be introduced into an array, making
it easy to minimize high-frequency reflections off of balconies
and other architectural obstacles.
Optional Components
| • |
The MG-MICA grid can fly up to 22 MICA cabinets
with a 7:1 or 25 cabinets with a 5:1 load safety ratio* for
large MICA arrays. It also allows for groundstacking of MICA
as well as 600-HP subwoofers (with optional rigging.) |
|
| • |
The MGCP-MICA attaches directly to the MG-MICA
grid, and allows for a single hanging point without bridling,
especially important in applications with low trim heights. |
| • |
The MTF-MILO/MICA transition grid facilitates
using MICA as downfill for a MILO main array. |
| • |
The MDTL-MICA downtilt link adds a fixed amount
of downtilt to ground-stacked MICA loudspeakers, with an additional
6 degrees of adjustment possible with the MICA’s rear
GuideALinks. The downtilt link connects between the MG-MICA
grid or the top 600-HP subwoofer and the lowest MICA loudspeaker. |
| • |
The MCF-MICA caster frame allows up to four MICA
cabinets to be transported fully rigged, and is dimensioned
to provide tight packing in both U.S. and European trucks. To
make MICA entirely road-ready, durable nylon covers for up to
four cabinets are also available. |
 |
|
 |
|
 |
|
 |
The
MG-MICA grid can fly up to 22 MICA cabinets with a 7:1 or
25 cabinets with a 5:1 load safety ratio*.
|
|
The MG-MICA
grid also allows for groundstacking of MICA as well as 600-HP
subwoofers. |
|
The MGCP-MICA
attaches directly to the MG-MICA grid, and allows for a single
hanging point without bridling (for low trim heights.) |
|
The MCF-MICA
caster frame allows up to four MICA cabinets to be transported
fully rigged. |
* Restrictions apply: Rating depends on grid angle and the array’s
center of gravity, which can be determined using MAPP Online Pro’s
rigging calculator. |
