| Acoustical (each loudspeaker) |
Operating Frequency Range ( 1) |
...
|
±4 dB 40 Hz - 18 kHz |
|
... |
±90° 50 Hz -16 kHz |
|
... |
136 dB @ 1 meter |
Dynamic Range |
... |
> 110 dB |
|
| Coverage |
|
... |
80° Horizontal x 40° vertical |
|
| Crossover |
|
| Transducers |
Low Frequency |
...
|
15" Cone driver |
High Frequency |
...
|
2" Throat, 4" diaphragm compression driver |
|
| Audio Input |
Type |
...
|
10 k ohm impedance, electronically balanced |
Connector |
... |
Female XLR input and male XLR loop output or VEAM |
Nominal Input Level |
... |
+4 dBu (1.23 Vrms) |
|
| Amplifiers |
Type |
...
|
Complementary power MOSFET output stages (audio class AB/H) |
|
... |
1240 Watts (620 watts/channel) |
THD, IM, TIM |
... |
< .02 % |
|
| AC Power |
Connector |
...
|
250 V NEMA L6-20 (Twistlock) inlet, IEC 309 male inlet, or VEAM (3) |
Automatic Voltage Selection |
... |
85 - 134 VAC; 165 - 264 VAC; 50/60 Hz (4) |
Operational voltage range |
... |
Turn on: 85 VAC; Turn off: 134 VAC; 50/60 Hz |
|
... |
Turn on: 165 VAC; Turn off: 264 VAC; 50/60 Hz |
Max.Continuous RMS Current (> 10 sec) |
... |
at 115 V: 8 A rms
at 230 V: 4 A rms
at 100 V: 10 A rms |
Burst RMS Current (< 1 sec) |
... |
at 115 V: 15 A rms
at 230 V: 8 A rms
at 100 V: 18 A rms |
Max Peak Current During Burst |
... |
at 115 V: 22 A pk
at 230 V: 11 A pk
at 100 V: 25 A pk |
Inrush current |
... |
< 12 A @ 115 V |
|
| Physical |
Dimensions |
... |
21.00" w x 30.00" h x 22.20" d (533 mm x 762 mm x 564 mm) |
Weight |
... |
130 lbs (58.97 kg); Shipping: 150 lbs (68.04 kg) |
Enclosure |
... |
All birch plywood |
Finish |
... |
Black textured |
Protective Grille |
... |
Perforated steel grille, charcoal-grey foam |
Rigging |
... |
Aircraft pan fittings, two on both top and bottom. Working load for each fitting is 500 lbs, which is 1/5 the cabinet breaking strength (with straight tensile pull). |
|
| Notes |
1. Subject to half-space loading, measured with one-third octave frequency resolution in fixed ISO bands.
2. Nominal 8 ohm resistive load, pink noise, 100 V peak.
3. Other connectors available. For European applications, the IEC 309 (16A) panel is used.
4. The unit is rated at 88-125V and 182-235V, 50/60 Hz, to satisfy EC standards for -10% to 6% AC line voltage. |
